DIY Nesting Tables for Small Spaces
Learn how to make nesting tables that save space in small homes. This guide covers planning, materials, step-by-step construction, and smart use of nesting tables for compact living, including balcony spaces.
Contents
- Why Nesting Tables Are Perfect for Small Spaces
- Planning Your DIY Nesting Tables
- Determining Nesting Clearance
- Choosing Table Heights and Dimensions
- Leg Placement for Stability and Nesting
- Materials and Tools You'll Need
- Step-by-Step: How to Make Nesting Tables
- Step 1: Cut the Tabletops
- Step 2: Cut the Legs
- Step 3: Attach Legs to Tabletops
- Step 4: Sand and Finish
- Step 5: Test Nesting
- Using Nesting Tables to Maximize Small Spaces
- Living Room Solutions
- Bedroom Nightstands
- Balcony and Outdoor Spaces
- Comparison of Nesting Table Design Options
- Common Mistakes to Avoid
- Adapting the Project to Your Budget and Layout
- How Nesting Tables Help with Moving and Unpacking
- Final Thoughts
DIY nesting tables are an ideal space-saving furniture solution for small homes. They provide flexible surface area that can be tucked away when not in use, making them perfect for apartments, tiny houses, or any room where square footage is precious. This guide explains how to make nesting tables yourself, covering planning, materials, construction, and tips for using them effectively in compact spaces.
Why Nesting Tables Are Perfect for Small Spaces
Nesting tables are a set of tables of graduated sizes that slide under one another, taking up the floor space of only the largest table when stored. This clever design gives you extra tabletop space when needed—for drinks, books, or décor—without permanently cluttering your room. In a small home, every piece of furniture should earn its place; nesting tables do double duty as both functional furniture and space savers.
Planning Your DIY Nesting Tables
Before you start building, consider how you will use the tables and where they will live. This will guide your choices for tabletop dimensions, table heights, and materials.
Determining Nesting Clearance
The key to a successful nesting table set is proper nesting clearance—the space between the underside of one table and the top of the table below it. A good rule of thumb is to leave at least 2 inches of vertical clearance between tables when nested. This ensures the smaller table slides in and out easily without scraping. The horizontal clearance (side-to-side space) should be about 1 inch on each side, so the legs of the smaller table don't hit the legs or apron of the larger table.
Choosing Table Heights and Dimensions
Standard side table heights range from 20 to 24 inches. For nesting tables, you'll want each subsequent table to be slightly lower so it can slide under. A common setup is:
- Large table: 24 inches long, 16 inches wide, 22 inches high
- Medium table: 20 inches long, 14 inches wide, 20 inches high
- Small table: 16 inches long, 12 inches wide, 18 inches high
These dimensions are just a starting point; adjust based on your space and needs. Remember to account for the thickness of the tabletop when calculating overall height.
Leg Placement for Stability and Nesting
Leg placement is crucial for both stability and nesting ability. For a rectangular table, legs are typically placed at the four corners, set in about 1 to 2 inches from the edges. This inset creates a stable base and allows the legs of the smaller table to clear the legs of the larger table when nested. For a more modern look, you can use a single central leg or a trestle base, but ensure the design still allows clearance for nesting.
Materials and Tools You'll Need
One of the best things about DIY nesting tables is that you can use a variety of materials, from budget-friendly plywood to repurposed wood. Here's a basic list:
- Wood for tabletops: 3/4-inch plywood, solid wood panels, or even repurposed shelves
- Wood for legs: 2x2 lumber, table legs from a hardware store, or even metal hairpin legs for a modern look
- Wood glue
- Screws (1 1/4-inch and 2-inch)
- Sandpaper (120 and 220 grit)
- Wood finish: paint, stain, or polyurethane
- Tools: saw (circular or hand saw), drill, screwdriver, measuring tape, square, clamps
For a budget-friendly option, consider using a single sheet of plywood for all tabletops and legs, or look for salvaged wood. Hairpin legs are an easy way to get a modern look and simplify construction—just screw them to the tabletop.
Step-by-Step: How to Make Nesting Tables
Follow these steps to build a set of three nesting tables. Adjust dimensions as needed.
Step 1: Cut the Tabletops
Cut three rectangular tops to your desired dimensions. For example: 24x16 inches, 20x14 inches, and 16x12 inches. Sand the edges smooth.
Step 2: Cut the Legs
Cut legs from 2x2 lumber or use pre-made legs. For a 22-inch high table with a 3/4-inch thick top, cut legs to 21 1/4 inches. For the medium table (20 inches high), cut legs to 19 1/4 inches; for the small table (18 inches high), cut legs to 17 1/4 inches.
Step 3: Attach Legs to Tabletops
Position each leg at the corners of the underside of the tabletop, inset about 1 inch from the edges. Use wood glue and screws to secure. For added strength, add corner braces or a simple apron (a frame of 1x2 lumber) between the legs.
Step 4: Sand and Finish
Sand all surfaces smooth, starting with 120-grit and finishing with 220-grit. Apply your chosen finish—paint, stain, or polyurethane—and let dry completely.
Step 5: Test Nesting
Once dry, test that the tables nest properly. The medium table should slide under the large table with at least 2 inches of vertical clearance, and the small table should slide under the medium table. If clearance is too tight, you may need to trim the legs slightly or adjust leg placement.
Using Nesting Tables to Maximize Small Spaces
Nesting tables are versatile and can be used in many ways to make a small home more functional.
Living Room Solutions
Use the largest table as a coffee table or side table. When guests come, pull out the smaller tables for drinks and snacks. Store them nested when not in use to keep the room feeling open.
Bedroom Nightstands
Use a nesting table set as a nightstand. The largest table holds a lamp and book; the smaller table can be pulled out for a cup of tea or a phone charging station.
Balcony and Outdoor Spaces
Even a small balcony can benefit from nesting tables. Use the largest table as a plant stand or bistro table base, and pull out the smaller ones for drinks or snacks when you're enjoying the outdoors. Choose weather-resistant finishes if the tables will be exposed to the elements.
Comparison of Nesting Table Design Options
| Design Option | Pros | Cons | Best For |
|---|---|---|---|
| All-wood (square legs, apron) | Sturdy, classic look, customizable | More complex construction, heavier | Beginner woodworkers with basic tools |
| Hairpin legs with wooden tops | Modern aesthetic, simple assembly, lightweight | Less sturdy for heavy items, may scratch floors | Renters, modern decor, quick projects |
| Repurposed materials | Budget-friendly, eco-friendly, unique character | May require extra prep (sanding, painting), sizes vary | Upcyclers, low-budget projects |
Common Mistakes to Avoid
- Insufficient nesting clearance: If you don't leave enough vertical space, the tables will scrape and be difficult to separate. Always account for tabletop thickness and any hardware that protrudes.
- Legs too close to the edges: This can cause the smaller table's legs to hit the larger table's legs when nesting. Inset legs at least 1 inch from the edges.
- Unstable proportions: A table with a top that's too large for its base can tip. Keep the base width at least two-thirds of the top width.
- Skipping sanding: Rough edges can snag clothing or cause splinters. Always sand thoroughly before finishing.
Adapting the Project to Your Budget and Layout
Budget-friendly: Use a single sheet of plywood (cut into all parts) and paint instead of stain. Look for free wood from pallets or discarded furniture.
Mid-range: Buy pre-cut table legs and use solid wood tops from a home improvement store. Add a clear polyurethane finish for a durable, natural look.
Premium: Use hardwood like oak or walnut, and add details like tapered legs or a decorative edge profile. Finish with Danish oil for a rich, hand-rubbed look.
For very small rooms, consider making only two tables instead of three, and choose narrower dimensions to fit tight spaces.
How Nesting Tables Help with Moving and Unpacking
If you're moving to a small home, nesting tables are a smart choice. They are lightweight, easy to carry, and take up minimal space in a moving truck. Once you arrive, you can unpack them first and use them as temporary surfaces for sorting boxes and organizing belongings. Assign the largest table as a landing spot for keys and mail, and use the smaller tables as needed for unpacking tasks. This helps you establish a functional space immediately, even before all furniture is arranged.
Final Thoughts
DIY nesting tables are a practical, rewarding project that can significantly improve the functionality of a small space. By carefully planning dimensions and clearance, you can create a set that fits your needs and style. Whether for a living room, bedroom, or balcony, nesting tables offer flexible surface area without sacrificing valuable floor space.
Read next
-
DIY Wall-Mounted Fold-Down Desk: Plans and Building Guide
-
DIY Space-Saving Furniture Ideas for Small Homes
-
DIY Narrow Console Tables for Small Spaces
-
DIY Storage Bench Plans and Ideas for Small Spaces
-
DIY Outdoor Storage Bench for Small Patios and Balconies
-
DIY Narrow Coffee Tables for Small Living Rooms
-
DIY Side and End Tables for Living Rooms and Bedrooms