How to Hide Cables and TV Cords in an Apartment
Practical, renter-friendly ways to hide cables in an apartment, including cords on a wall-mounted TV. A step-by-step order that fits into your move, with options for different budgets and layouts.
Contents
- What is the best way to hide cables in an apartment?
- Why plan cable hiding as part of your move?
- In what order should you tackle cables when moving in?
- How should you pack cables so unpacking is easier?
- How does furniture placement help hide cables?
- Which renter-friendly cable-hiding methods work best?
- Cord clips
- Cable sleeves
- Surface-mounted cable raceways and cable covers
- Routing behind and under furniture
- How to hide cords on a wall-mounted TV in an apartment
- Hiding TV cables when the TV sits on a stand
- Examples by budget and layout
- Almost no budget
- Small budget
- Moderate budget or a longer stay
- Studio apartment
- One-bedroom or shared apartment
- How do you give compact zones, including a balcony, a clear purpose?
- Common mistakes when hiding cables in an apartment
- Summary: a practical plan for hiding cables in an apartment
The most reliable way to hide cables in an apartment is to cut them down first, then route and cover what remains. Remove cables you don't need. Shorten or bundle the long ones. Place furniture so cords run behind it, not across open floor or wall. Then cover the visible stretches with removable options such as cord clips, cable sleeves or surface-mounted cable raceways. For a wall-mounted TV, the usual renter-friendly fix is a paintable raceway running straight down from the TV to the outlet or media console. In-wall solutions are only for tenants who have the landlord's written permission and in-wall-rated parts.
The easiest time to do this is during a move. Before the boxes are open, you can decide where the TV, desk and chargers will go. Doing it later means pulling furniture back out of place.
What is the best way to hide cables in an apartment?
The best approach follows four steps in a fixed order: reduce, place, route, cover. Each step makes the next one smaller and cheaper.
- Reduce. Get rid of cables for devices you no longer use. Combine chargers where one multi-port charger can replace several. Use a single power strip per zone instead of chained adapters.
- Place. Put electronics close to outlets and to each other, so cable runs are short.
- Route. Run cords along edges: behind furniture, along baseboards, under shelves and down table legs. Avoid diagonals across walls or floors.
- Cover. Only now hide the visible remainder with clips, sleeves, raceways or cable covers.
Many people buy covers first and then find they need far more than expected. That happens because the cable layout was never simplified.
Why plan cable hiding as part of your move?
Planning cables during a move keeps the job manageable. Furniture placement and cable routing depend on the same thing: where the outlets, TV connection and internet point are. If you note these before unpacking, you set up each area once, with cords already routed.
In what order should you tackle cables when moving in?
- Map the outlets. On a rough floor plan or a phone photo of each room, mark every power outlet, the TV or antenna point, and where the internet router will sit. This takes a few minutes and drives every later decision.
- Decide the main zones. Pick spots for the TV and media area, the desk or work spot, bedside charging and the router. Place each zone near the outlet it needs.
- Place large furniture first. Position the sofa, TV console, bed and desk before plugging anything in. Leave a small gap behind pieces so cables can run without being crushed.
- Connect the essentials. Set up the router, the bedside chargers and the TV, in that order. These are what you will want working on the first night.
- Route and tidy each zone. Bundle and clip as you connect each zone, rather than leaving it for a big tidy-up later.
- Add covers last. Wait until you have lived with the layout for a few days. Then cover only the stretches that are still visible or a trip hazard.
How should you pack cables so unpacking is easier?
Pack cables by device and by room, labelled at both ends. You can then reconnect everything without guessing, and you won't unpack a tangle you will have to undo later.
- Photograph each setup before unplugging. A photo of the back of the TV, router or computer shows which cable goes into which port.
- Sort as you unplug. Make three piles: keep, donate or recycle (spares and cables for devices you no longer own), and unknown. Test unknown cables or let them go. Don't move a box of mystery cords.
- Label both ends. Masking tape and a pen are enough. Write the device name, for example "TV power" or "router to modem".
- Bag cables per device. Coil each cable loosely and secure it with a reusable tie. Put it in a bag with its device or in a box labelled by room.
- Pack a first-night kit. Include phone chargers, one power strip, the router and its cables, a few reusable ties, cord clips, scissors and masking tape. Keep this kit with you rather than in the moving truck.
How does furniture placement help hide cables?
Furniture placement is the cheapest cable-hiding tool in a small apartment. A cord running behind a sofa, console, bookcase or bed needs no cover at all.
- Put the TV console or shelf under or beside the outlet. The power cords then disappear behind it.
- Back the desk against the wall with the outlet. You can run cables down a desk leg or along the underside of the desktop.
- Keep the router on a shelf near the internet point. Don't run a long network cable across the room.
- Use the bed or nightstand to hide the bedside charger. Leave just the charging end of the cable reachable.
The trade-off is flexibility. In a small room, the best spot for cables may not be the best spot for light or walking space. If the two conflict, prioritise a clear walkway and accept a short covered run along the wall.
Which renter-friendly cable-hiding methods work best?
The right method depends on how many cables there are, where they run and whether you can leave marks on walls. The table compares common options that don't require drilling into walls.
| Method | Best for | Relative cost | Wall impact | Main trade-off |
|---|---|---|---|---|
| Re-routing behind furniture | Most living rooms and bedrooms | None | None | Limits where furniture can go |
| Cord clips | Single cables along desk edges, baseboards, furniture backs | Low | Small adhesive patches | Cables stay visible, just tidier |
| Cable sleeves | Several cables running together, such as behind a TV or desk | Low | None | Bundles cables but doesn't attach them to the wall |
| Surface-mounted cable raceways | Visible runs on walls, such as from a wall-mounted TV to the outlet | Low to moderate | Adhesive backing; may lift paint when removed | Visible channel unless painted to match the wall |
| Floor cable covers | Cables that must cross a floor area | Low to moderate | None on walls | Still a raised strip; best avoided in walkways where possible |
| Cable boxes or baskets | Power strips and excess cable length | Low | None | Need space on the floor or a shelf |
| In-wall cable kits | Wall-mounted TVs in longer-term rentals | Higher | Holes in the wall | Needs landlord permission and in-wall-rated parts; often a professional job |
Cord clips
Cord clips are small holders that guide one or a few cables along an edge. Use them under a desk, along a baseboard or down the back of a shelf. They are cheap and quick to fit. Clips that attach with removable adhesive, or clips that grip furniture rather than walls, are the easiest choice for renters.
Cable sleeves
Cable sleeves are flexible fabric or plastic tubes that wrap several cables into one neat bundle. They work well where cables hang in the air, such as behind a TV stand or from a desk to the floor. A sleeve makes a tangle look like a single cord. However, it doesn't fix the cord to anything, so it is often combined with clips.
Surface-mounted cable raceways and cable covers
A surface-mounted cable raceway is a slim channel that sticks to the wall or baseboard. You snap the cables inside it. Many raceways can be painted to match the wall, which makes them much less noticeable. Before buying, measure the length of the run and count the cables, so the channel is long enough and wide enough to hold them all.
Floor cable covers are flatter channels for cables that have to cross the floor. Use them only where re-routing around the room isn't possible.
Routing behind and under furniture
Routing behind and under furniture means running cables where they are already out of sight. Examples include the back of a bookcase, the underside of a desk, or the space behind a headboard. This often removes the need for any cover. It works best when you plan it while placing furniture during the move.
How to hide cords on a wall-mounted TV in an apartment
To hide cords on a wall-mounted TV in an apartment without opening the wall, run a paintable surface-mounted raceway vertically from behind the TV down to the outlet or to a console placed beneath it. Paint the raceway the wall colour. Shorten or bundle the cables so the raceway only has to carry a few lines.
- Plan the TV position around the outlet. If you can, mount the TV directly above an outlet or above where a console will sit. A short, straight vertical run is far less visible than a long or angled one.
- Reduce what runs down the wall. Keep streaming devices, receivers and consoles on a shelf or console below the TV, not hanging behind it. That way, often only the TV power cord and one signal cable need to come down.
- Bundle cables behind the TV. Use a cable sleeve or ties to gather slack. Short cables and right-angle plugs help the cables sit flatter against the wall.
- Test the adhesive. Stick a small piece of the raceway's backing in a hidden spot for a day. Then check whether it peels paint. If it does, try removable adhesive strips or another way to hide the cords.
- Fit the raceway straight and vertical. Use a level or a plumb line. A crooked channel draws more attention than the cables did.
- Paint it, then load the cables. Paint the raceway before snapping cables inside. This is easier, and the paint won't get on the cords.
- Finish at the bottom. End the run behind a console, a plant, or a basket that holds the power strip.
About in-wall options: ordinary TV power cords aren't designed to run inside a wall. In-wall power kits made for that purpose exist. In a rental they need the landlord's permission, they involve cutting holes, and they are often best handled by a qualified electrician. For most short or medium-term tenancies, a painted raceway is the practical choice.
Hiding TV cables when the TV sits on a stand
Hiding TV cables is simpler when the TV sits on a stand or console. Pull the console slightly away from the wall. Run cables down the back of the TV in a sleeve. Keep the power strip in a box or basket on the floor behind the console. Clips along the back edge of the console keep cables from sliding into view.
Examples by budget and layout
Choose the cheapest method that solves the visible problem, and upgrade only where you still notice cables.
Almost no budget
- Remove unused cables and chargers.
- Move furniture to cover cord runs.
- Use reusable ties or bread-bag-style twist ties to gather slack.
- Tuck the power strip behind or under furniture.
- Trade-off: cables are hidden only where the furniture allows.
Small budget
- Add cord clips under the desk and along baseboards.
- Use one cable sleeve behind the TV and one at the desk.
- Put a lidded box over the main power strip.
- Trade-off: some cables remain visible but neat.
Moderate budget or a longer stay
- Fit a paintable raceway for the wall-mounted TV.
- Add a raceway along the baseboard where a cord must cross a wall.
- Use a multi-port charger to replace several separate chargers.
- Ask the landlord about an in-wall kit if you plan to stay for years.
- Trade-off: more time spent installing and painting, and possible touch-ups at move-out.
Studio apartment
In a studio, one wall often has to serve as TV wall, workspace and charging area. Group these on the wall with the most outlets. Use a single raceway along the baseboard to connect them, and keep the bed side of the room as cable-free as possible. Fewer zones means fewer cable runs to hide.
One-bedroom or shared apartment
With separate rooms, give each room one power hub: a power strip in a box or behind a piece of furniture. Avoid running extension cords between rooms or under doors. In a shared flat, keep shared devices such as the router in a common area near the internet point. That way nobody's cables run through someone else's space.
How do you give compact zones, including a balcony, a clear purpose?
Give each small zone one clear job, and only the cables that job needs. A zone with a defined purpose collects fewer stray cords.
- Entry or hallway: a single charging spot on a shelf or in a drawer, if there is an outlet nearby. Otherwise keep charging in the bedroom or living room.
- Desk corner: one power strip under the desk and cables run down one leg. Use a sleeve to the floor.
- Bedside: one charger behind the nightstand, with the cable clipped to the nightstand's edge.
- Balcony: decide whether it is a cable-free retreat or a lightly powered space. A cable-free balcony is the simplest choice: use battery or solar lights and keep indoor extension cords out. Running an indoor cord through a balcony door can pinch the cord and expose it to weather. If you need power outside, use only equipment and outlets rated for outdoor use, and check the building rules first.
Common mistakes when hiding cables in an apartment
- Buying covers before simplifying. You end up covering cables you could have removed.
- Running cords under rugs or through doorways. Cords can be damaged when stepped on or pinched, and the damage stays out of sight.
- Hiding power strips where heat can't escape. Choose boxes with ventilation openings, and don't bury chargers under fabric.
- Daisy-chaining power strips. Plug one strip into the wall rather than strips into strips.
- Skipping the adhesive test. Strong adhesive can peel paint and affect a deposit.
- Pulling cables tight. Leave a little slack at each plug so cables aren't strained.
- Putting standard cords inside walls. Only use in-wall-rated parts, and only with permission.
- Forgetting move-out. Keep spare paint and note where you placed adhesive, so removal and touch-ups are quick.
Summary: a practical plan for hiding cables in an apartment
Hiding cables in an apartment works best as part of moving in, not as a separate project later:
- Map the outlets.
- Pack cables labelled and sorted by device.
- Place furniture so cords run behind it.
- Connect the essentials first.
- Cover only what is still visible.
For hiding TV cables in an apartment, keep devices below the screen, bundle the slack and run one painted raceway straight down. This approach works on any budget and needs no extra space. It also leaves the walls in a condition you can restore when you move out.