How to Reduce Heating Costs in an Apartment
A practical, ordered guide to reducing apartment heating costs: find air leaks, draft-proof a rental without damage, set thermostats and schedules, improve radiator efficiency and plan your layout and balcony for warmth.
Contents
- What is the fastest way to start reducing apartment heating costs?
- Where does an apartment lose the most heat?
- Common leak points in a typical apartment
- How to find draughts without special tools
- How do you draft-proof a rental apartment without damaging it?
- Which renter-friendly draft sealing methods suit which problem?
- Step-by-step: sealing one window in a rental
- What must you never seal?
- How should you set the thermostat and heating schedule?
- Practical thermostat and schedule rules
- What if the building controls the heating?
- How can you improve radiator efficiency in a small apartment?
- How do you plan a move or rearrangement around keeping warm?
- Before moving day: prioritise inspection
- Packing: make a "first-night warmth" box
- Unpacking order: warm one room first
- Furniture layout that helps heating
- How can zoning make a small apartment warmer?
- How should you use a balcony in winter to save heat?
- Seal the balcony door first
- Practical winter uses for a balcony
- Which steps fit different budgets and layouts?
- Examples for common apartment situations
- How do you balance draught-proofing with ventilation and moisture?
- What are the most common mistakes when trying to cut heating costs?
- Your next steps
To reduce heating costs in an apartment, work in this order: stop the air leaks first, especially around windows, entrance doors and the balcony door. Next, set a sensible thermostat temperature and heating schedule. Then make sure radiators can release heat freely into the room. Finally, arrange furniture, textiles and storage so the rooms you use most stay warm. Most of these steps cost little or nothing, and renters can do them without permanent changes.
This guide explains what to do, in what order and why each step helps. It also covers moving in or rearranging a small home, because the time before furniture goes into place is the easiest moment to fix draughts and keep radiators clear.
What is the fastest way to start reducing apartment heating costs?
The fastest way to start reducing apartment heating costs is to deal with draughts before changing anything else. A heating system cannot keep a room warm efficiently while cold air keeps coming in through gaps. Once the leaks are under control, lower temperatures feel comfortable and schedules work as intended.
- Find air leaks (free, about an hour). Check windows, the entrance door, the balcony door, letterboxes, keyholes and gaps around pipes.
- Seal the worst leaks with removable materials (low cost). Start with the door and window that feel coldest.
- Adjust thermostat settings and heating schedules (free). Heat the rooms you use, at the times you use them.
- Free up the radiators (free). Move furniture, curtains and laundry that block heat output.
- Add insulating textiles and zoning (low to moderate cost). Use curtains, rugs and closed doors to keep heat where you need it.
This order matters. Thermostat changes made in a draughty room often get reversed within days because the room feels cold. Sealing first makes every later step more effective.
Where does an apartment lose the most heat?
Apartment heat loss usually happens through gaps and through cold surfaces. Gaps include air leaks around window sashes, door frames and service openings. Cold surfaces include single glazing, poorly insulated external walls and floors above unheated spaces. The exact pattern depends on the building, so check your own home rather than assuming.
Common leak points in a typical apartment
- Window frames and opening sashes: worn or missing seals let cold air in, particularly on windy days.
- The entrance door: the gap at the bottom, the letterbox and the keyhole can all bring in cold air from the stairwell.
- The balcony door: it is often a large glazed door with seals that see heavy use. It is frequently the coldest spot in the home.
- Pipe and cable penetrations: look under sinks, behind radiators and around the kitchen.
- Unused chimneys or old vents in older buildings. These should only be blocked with the landlord's agreement, and never if they serve a gas or combustion appliance.
How to find draughts without special tools
You can locate most draughts on a cold, windy day with simple checks:
- Run the back of a slightly damp hand slowly along frames and door edges. A leak feels like a cool stream of air.
- Hold a thin strip of tissue paper near seams. If it flutters, air is moving through the gap.
- Close a door or window on a sheet of paper. If the paper slides out easily, the seal is not pressing tightly at that point.
- Note each leak on a simple floor sketch, ranked by how strong it feels. This ranking becomes your work order.
How do you draft-proof a rental apartment without damaging it?
Draft proofing a rental apartment means sealing air leaks with materials you can remove without leaving marks. Good options include removable weatherstripping, door draft excluders, window insulation film and heavy curtains. Read your tenancy agreement first. Ask the landlord before using anything with strong adhesive or anything that changes fixtures. Photograph frames and paintwork before you start, so you have a record of their original condition.
Which renter-friendly draft sealing methods suit which problem?
| Method | Best for | Relative cost | Trade-offs and cautions |
|---|---|---|---|
| Removable weatherstripping (foam, rubber or silicone strips) | Gaps around opening windows and door frames | Low | The adhesive can lift paint on some surfaces, so test it in a hidden spot. Strips that are too thick stop doors and windows closing properly. |
| Door draft excluders (fabric snakes or under-door strips that attach without screws) | Gaps under entrance, balcony and internal doors | Free to low | Fabric snakes move when the door opens. Slide-on types stay in place but must match the door thickness. |
| Window insulation film (shrink film fixed to the frame with double-sided tape) | Single glazing and old frames you don't need to open in winter | Low | The window can't be opened until the film is removed. The tape can pull paint when removed. The film looks less clear than bare glass. |
| Removable sealant or peelable caulk | Fixed gaps that don't move, such as around a frame edge | Low | It must be removed carefully in spring. It is not suitable for opening joints. |
| Heavy or thermal-lined curtains | Large windows and balcony doors | Low to moderate | They must not hang over radiators. Open them on sunny days to let in solar warmth. |
| Keyhole covers and letterbox brushes | Entrance doors facing a cold stairwell | Low | A letterbox brush may need screws, so ask permission first. |
Step-by-step: sealing one window in a rental
- Clean and dry the frame. Adhesives fail on dust and condensation.
- Test the tape or strip on a small hidden area. Leave it for a day, then peel it off and check the finish.
- Fit weatherstripping to the frame where the sash presses against it, not on the moving sash edge.
- Close the window and check it latches without forcing. If it doesn't, use a thinner strip.
- If the window will stay shut all winter, add insulation film to the inner frame and tighten it with a hairdryer, following the product instructions.
- Keep the instructions and a note of what you used, so you can remove it correctly when you move out.
What must you never seal?
Never block air bricks, trickle vents in window frames, bathroom or kitchen extract fans, or vents that serve a gas boiler, gas fire or other combustion appliance. These openings supply air for safe combustion and remove moisture. Sealing them can cause dangerous conditions and mould. Draught-proofing should target accidental gaps, not designed ventilation.
How should you set the thermostat and heating schedule?
Set the thermostat to the lowest temperature at which you are comfortable in the room you are using. Then use a heating schedule so the home warms up shortly before you need it and cools during the hours you are asleep or away. Many health guidelines treat about 18 °C as a sensible minimum for living spaces for healthy adults. Older people, babies and anyone with health conditions may need it warmer.
Practical thermostat and schedule rules
- Change one thing at a time. Lower the setting by 1 °C and live with it for a few days before adjusting again.
- Use schedules rather than manual on and off. Set heating to start shortly before you wake or return home, and to drop back before bedtime.
- Avoid switching heating fully off in very cold weather. A deeply chilled apartment takes a long time to recover and is more prone to condensation. A lower setback temperature is often more practical.
- Use thermostatic radiator valves (TRVs) if fitted. Set lower numbers in bedrooms and hallways and higher numbers in the room you sit in.
- Place a cheap room thermometer away from radiators and windows. It shows the actual temperature, rather than the dial number.
What if the building controls the heating?
In some apartment buildings, heating is centrally controlled or included in a flat fee. In that case, your savings may come mainly from comfort rather than a lower bill. You can still use TRVs, close doors to unused rooms and reduce draughts. If radiators stay cold or overheat, report it to the landlord or building manager instead of opening windows to cool the room.
How can you improve radiator efficiency in a small apartment?
Radiator efficiency improves when warm air can circulate freely and when the radiator heats fully from top to bottom. In a small apartment, the most common problem is blocked radiators, not faulty ones.
- Keep a clear space in front of each radiator. Sofas, beds and desks pushed against radiators absorb heat and stop warm air reaching the room.
- Tuck curtains behind or above radiators. Curtains that fall over a radiator send heat up behind them and towards the window. Shorter curtains or tie-backs help.
- Don't dry laundry directly on radiators. Wet clothing blocks heat output and adds moisture to the air, which increases condensation.
- Check for cold spots. A radiator that is cold at the top but warm at the bottom may need bleeding. Check your tenancy agreement or ask the landlord whether you may do this, and follow the correct procedure for your system.
- Consider a reflective panel behind radiators on external walls. These are usually low cost and removable. They aim to reflect heat back into the room rather than into a cold wall.
How do you plan a move or rearrangement around keeping warm?
The best time to cut heating costs in a new apartment is before the furniture arrives. Empty rooms make it easy to inspect windows, fit seals and see where radiators are. A manageable move puts warmth tasks early in the plan instead of leaving them until the first cold night.
Before moving day: prioritise inspection
- Walk through the empty apartment and check windows, doors, the balcony door and radiators. Test that each radiator heats up.
- Photograph frames, sills and paintwork to document their condition before you add any seals.
- Sketch the floor plan. Mark radiators, external walls, the coldest windows and the balcony door.
- Decide where large furniture goes using that sketch, so no radiator ends up hidden behind a wardrobe or sofa.
- If possible, fit weatherstripping while the rooms are empty and the surfaces are easy to reach and clean.
Packing: make a "first-night warmth" box
Sort belongings so warmth essentials travel together and are opened first. A clearly labelled box might contain:
- A door draft excluder or a rolled towel for the entrance door
- Weatherstripping, scissors and a cleaning cloth
- Curtains and tension rods or temporary hooks
- A rug or two for bare or cold floors
- Bedding and a warm throw
- A room thermometer and, if your system needs one, a radiator bleed key
While sorting, treat textiles as part of your heating plan. Thick curtains, rugs and blankets are worth keeping if you have room. Thin, rarely used decorative throws are easier to let go of.
Unpacking order: warm one room first
Unpack the bedroom first and make it warm and usable. Close its door, hang the curtains and put down a rug. Then move on to the main living area and the kitchen. Leave storage-heavy spaces, such as cupboards, until last. This way you always have one comfortable room. It also avoids heating the whole apartment while it is still full of open boxes.
Furniture layout that helps heating
- Leave a small gap between large furniture and cold external walls, so air can circulate and condensation is less likely to collect behind it.
- Place seating near internal walls, or face it towards the radiator, rather than right next to a draughty window.
- Put tall bookcases or wardrobes against internal walls where possible.
- In a studio, a curtain on a ceiling track or a freestanding screen can create a warmer sleeping zone. Keep it clear of radiators and don't let it block airflow to the whole space.
How can zoning make a small apartment warmer?
Zoning means heating the parts of the apartment you actually use and letting others stay cooler. In a small home, simple zoning can make a noticeable difference to comfort without raising the thermostat.
- Close doors to rooms you aren't using, and turn their TRVs down. Don't turn them off completely in very cold weather.
- Use a door draft excluder on internal doors between warm and cool zones.
- Group daytime activities in one room, such as working, eating and relaxing, so only that room needs to stay fully warm.
- In an open-plan or studio layout, rely on rugs, curtains and furniture placement rather than extra heating devices.
Whether a small electric heater in one room costs less than running central heating depends on your energy tariff and how your heating is billed. Compare the two before relying on one.
How should you use a balcony in winter to save heat?
In winter, give the balcony a clear purpose that doesn't involve opening the door often. Common uses are a cold-storage area for seasonal items and an outdoor drying spot on dry days. Meanwhile, draft-proof the balcony door itself, because it is often one of the biggest air leaks in the apartment.
Seal the balcony door first
- Check the door seal with the paper test along all edges, including the bottom.
- Fit removable weatherstripping where the door meets the frame, and a door draft excluder along the threshold if there is a gap.
- Hang a heavy curtain over the balcony door, on a rod that clears any nearby radiator.
- Open and close the door less often by planning balcony trips, for example once a day rather than many short visits.
Practical winter uses for a balcony
- Seasonal storage: keep summer furniture cushions, garden tools or camping gear in sealed, weather-resistant boxes. Check your lease and building rules about what may be stored outside. Don't store items that could be damaged by frost or that block the door.
- Laundry drying on dry, breezy days: this reduces indoor moisture and keeps radiators clear.
- A glazed or enclosed balcony acts as a buffer between the outdoors and the living room. Keep the inner door closed. Don't heat the balcony space, because that adds cost without warming the apartment.
Which steps fit different budgets and layouts?
You can reduce heating costs on almost any budget. The table below groups common steps by cost. Pick the column that matches your situation and work from top to bottom.
| Budget | What to do | Why it helps |
|---|---|---|
| No cost | Rearrange furniture away from radiators, close internal doors, open curtains on sunny days and close them at dusk, set a heating schedule, use a rolled towel at the bottom of the door | Lets existing heat reach the room and stay there longer |
| Low cost | Removable weatherstripping, door draft excluders, keyhole covers, window insulation film on the worst window, a room thermometer | Reduces air leaks, which are often the biggest cause of discomfort |
| Moderate cost | Thermal-lined curtains for large windows and the balcony door, rugs for cold floors, reflective radiator panels, programmable thermostat or smart TRVs if the landlord allows | Cuts heat loss through glass and floors and improves control |
Examples for common apartment situations
- Studio apartment: focus on the entrance door, one main window and furniture placement. A single well-sealed space heats evenly, so the gains from closing internal doors are limited.
- One-bedroom with a balcony: seal the balcony door first, then the bedroom window. Keep the bedroom slightly cooler than the living room using its TRV.
- Ground-floor apartment: cold floors are common, so rugs and draught-free door thresholds matter more.
- Top-floor or corner apartment: more external surfaces usually mean more heat loss. Prioritise curtains, window sealing and keeping furniture off external walls.
- Apartment off a cold stairwell: the entrance door, letterbox and keyhole are often the main leaks.
How do you balance draught-proofing with ventilation and moisture?
A well-sealed apartment still needs fresh air to remove moisture from cooking, showering and breathing. The efficient approach is short, wide-open airing rather than leaving a window slightly open for hours.
- Open windows fully for a few minutes after cooking or showering, then close them again. Ideally create a cross-draught between opposite windows.
- Run kitchen and bathroom extract fans during and after use.
- Wipe condensation from windows in the morning, particularly behind insulation film or thick curtains.
- Watch for black mould spots on window reveals or behind furniture. They are a sign that ventilation or air circulation needs to improve.
What are the most common mistakes when trying to cut heating costs?
- Changing the thermostat before fixing draughts, then turning it back up because the room still feels cold.
- Blocking vents or trickle vents in an attempt to stop draughts. This creates moisture and safety problems.
- Hiding radiators behind sofas, beds or long curtains.
- Using strong permanent adhesives in a rental without permission, which can lead to deposit deductions.
- Fitting seals that are too thick, so windows and doors no longer close or lock properly.
- Drying laundry on radiators, which reduces heat output and adds humidity.
- Heating the whole apartment evenly when only one or two rooms are in use.
- Leaving the balcony door unsealed because it is opened often. In fact, it is often one of the leaks that most needs sealing.
Your next steps
- Do a draught check on the next cold, windy day and rank the leaks you find.
- Seal the worst one or two leaks with removable materials, starting with the entrance or balcony door.
- Lower the thermostat by 1 °C and set a simple heating schedule.
- Clear the space in front of every radiator and move curtains off them.
- Close doors to unused rooms and give the balcony a winter purpose that keeps its door shut.
- After a week, review comfort and the room thermometer readings, then adjust one thing at a time.